225g / 0.5 lb of 1.75mm Volcano Temperature TriColor Changing Pine/Orange/Yellow PLA 3D Printing Filament. This Filament changes color based on the temperature. When temperature is below 31°C (88°F) the filament stays in its original color Pine (Deep Green/Deep Grey). Filament color will change from color pine to color orange when temperature goes above to 31°C (88°F), and filament color will change from color orange to color yellow and when temperature goes above to 45°C (113°F).
- Recommended Extrusion Temperatures: 180C-230C
- The color change occurs immediately
- Normal PLA Printing Setting
- Color Changing when temperature goes above 31°C (88°F) and 45°C (113°F)
- Color Change from Pine to Orange to Yellow