null

Proto-Pasta Matte Fiber HTPLA - Green 3D Printing Filament 1.75mm (500 g)

$62.13
(No reviews yet) Write a Review
SKU:
PP-HTPLA-MF-GN-500G
Proto-Pasta Matte Fiber HTPLA - Green 3D Printing Filament 1.75mm (500 g)
  • All material is sealed with desiccant in a plastic bag
  • Usable on all PLA-compatible printers, such as Makerbot, Ultimaker, Printrbot, Lulzbot, and more!
  • Matte Fiber HTPLA - Green
  • Prints with standard PLA settings - no heated bed or fancy hardware required
  • No abrasive fillers so expect normal wear with standard nozzles

500 G of 1.75mm Proto-Pasta Matte Fiber HTPLA - Green Filament.

Designer Finish + Engineering Performance for Every Printer!

The look of Carbon Fiber without Carbon Fiber. Instead, Black Matte Fiber HTPLA uses plant fibers for a similar texture and sheen. Great for both artistic and technical parts with no special hardware required! Finish Printed parts have a low luster, textured surface which creates a highly desirable contrast between light and shadow. Texture, color, and sheen can be somewhat manipulated by printer settings as well as post-processing. Printed parts can also be smoothed or weathered with paint for alternate aesthetics. The plant-based fibers lend well to adhesion of paint and other aesthetic coatings. Performance Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. Dimensional stability is improved compared to HTPLA without fibers. The plant-based fibers improve adhesion of glues and coatings. Performance is similar to Carbon Fiber HTPLA but processing of Matte Fiber does NOT require a wear resistant nozzle. Compatibility No special hardware or nozzles are required for this plant-based composite. This material is not overly brittle, but is stiff and will break under excessive load. It prints like PLA on non-heated beds. Suggested print temperature is 190-230C, but we had good luck with a slow 1st layer at 230C on cold blue tape and 210C thereafter for a balance of strength and aesthetic. This material does absorb moisture and dry filament is recommend for best results. When saturated with moisture, this material oozes more readily. Lowering flow and/or temperatures can minimize oozing and improve detail, though higher temperatures are recommended for best mechanical properties. With higher temperatures, ooze artifacts can be removed post build. Finishing This material can be shaved/carved with a sharp blade for a smooth finish. Experiment with weathering or other painting techniques for a unique look. Also, expect improved bonding strength with glue compared to plastic without fiber.

Get the latest updates on new products and upcoming sales