High performance material for high performance hardware. Heated bed and 260C+ hot-end recommended!
Processing is more challenging. For best results, a heated bed is recommended to control warpage and improve layer adhesion. Cross-sectional area should be minimized.
- Available in 1.75 mm and 2.85 mm diameters, black or natural color
- 125g is an un-spooled loose coil.
- 500g and 750 g are spooled
In our experience, good results were achieved when printing small parts at 260C-280C using a .5mm nozzle and direct-drive spring loaded pinch-roll style extrusion head. For larger prints with good layer adhesion, 270C+ hot end, 140C+ heated bed, and an enclosure are ideal.